Matériel: | Steel |
---|---|
Content: | 75% ~ 80% |
Usage: | Grind |
Type de traitement: | Type de Roulement |
Taille: | 10-165mm |
Couleur: | Brun |
Fournisseurs avec des licences commerciales vérifiées
DiamèTre |
Cr % | L'éQuipement | |||
13-60mm(1/2"-2 1/4'') | 10-13 | Compartiment Ball mills-2èMe | |||
50-100mm(2''-4'') | 15-18 | Compartiment Ball mills-1st | |||
13-100mm(1/2"-4") | 15-22 | Ball mills-1er et 2 compartiments |
DiamèTre |
Cr % | L'éQuipement | |||
13-100mm(1/2"-4") | 10-35 | Ball mills | |||
100-160mm(4''- 6 1/2'') | 10-35 | Ball Mills et de SAG Mills |
Type |
Cr % |
Low-Cr | 1-3 |
Medium-Cr | 4-9 |
High-Cr | 10-18 |
Superhigh-Cr | 19 à35 |
Type |
Composants chimiques | |||||||
C | Si | Mn | Cr | Mo | Cu | P | S | |
Low-Cr | 1.8-3.2 | ≤1,2 | ≤1,5 | 1-4 | ≤1,0 | ≤0,5 | ≤0,15 | ≤0,15 |
Medium-Cr | 1.8-3.2 | ≤1,2 | ≤1,5 | 4-9 | ≤1,5 | ≤1,0 | ≤0,15 | ≤0,15 |
High-Cr | 1.8-3.2 | ≤1,2 | ≤1,5 | 10-18 | ≤1,0 | ≤1,5 | ≤0,10 | ≤0,10 |
Superhigh-Cr | 1.8-3.2 | ≤1,2 | ≤1,5 | 22-25 | ≤2,0 | ≤1,5 | ≤0,10 | ≤0,10 |
Type |
PropriéTéS méCaniques | Microstructure | ||||||
HRC | Temps de chute de balle | |||||||
Low-Cr | ≥45 | ≥8000 | P+C | |||||
Medium-Cr | ≥50 | ≥12000 | M+C | |||||
High-Cr | ≥58 | ≥15000 | M+C | |||||
Superhigh-Cr | ≥60 | ≥22000 | M+C | |||||
P-perlite C- M-Martensite carbure |
Fournisseurs avec des licences commerciales vérifiées