Pipe Welding Manipulator/ Welding Manipulator/Welding Column and Boom (1)Welding manipulator are used for the inside and outside circumferential and longitudinal welding. (2)It mainly consists of column, boom, pedestal,ladder,electrical equipmet and hand control box. We also offer welding hea d and flux recovery system if customer require. (2)There are three types for you to choose. Fixed type, Fixed with rotation type, movable type. (3)Column can do both retracting (left and right) and lifting(up and down) movement to meet weld need. (4)The speed of retracting are adjusted by Frequency Conversion Speed Control(VFD). It is precise and stable. (5)Movable type cab be used with track together, to facilitate operation. (6)Column and boom are often used with welding rotator and positioner together. (as show in following picture) (7)Welding head and Flux recovery system are offered (8)Hand-control box is offered to facilitate operation (9)There is safty device. Pipe Welding Manipulator/ Welding Manipulator/Welding Column and Boom This welding manipulator can be used in match with automatic welder, welding rotator (roller stand) or welding positioner (turing table), and for the inside and outside circumferential and longitudinal welding. It is also applicable to automatic welding
Model |
NHCZ-1515 |
Power Input |
3ph 380V AC 50/60Hz |
Beam Lift Itinerary |
1400mm |
Beam Stretch Itinerary |
1300mm |
Beam Lift Speed |
700mm/Min |
Beam Stretch Speed |
200-1500mm/Min |
Beam Drive Mode |
Inverter Motor +Ball Screw Drive |
Head Level Fine-tuning Itinerary |
100mm |
Head Vertical Fine-tuning Itinerary |
100mm |
Head Adjustment Mode |
Electrically Adjust |
Control Mode |
Hand Control Box Control |
H*L* B Over Dimension H*L*B |
2300*2200*620mm |