Hvt150, Hvt250 Outil de forage à manille hydraulique pour tuyau de forage Équipement de déchargement

• Personnalisation: Disponible
• Service après-vente: assistance en ligne
• Garantie: assistance en ligne
• N° de Modèle.: shackler
• Processus de fabrication: forger
• Traitement de surface: Spray-peinture
• Pression de fonctionnement: Pression atmosphérique
• Matériel: Fonte d′aluminium
• n° de modèle: pince de dérivation hydraulique
• utilisation: réparer et démonter les tuyaux
• type de modèle: tous les modèles
• type de travail: sans sangle
• application 1: pose de fibres de télécommunications
• application 2: pose de tuyaux d′égout
• application 3: pose du tuyau d′huile
• Paquet de Transport: packages exportés standard
• Spécifications: 60 mm
• Marque Déposée: yichao
• Origine: Chine
• Code SH: 84314310
• Capacité de Production: 100/mois

Description de Produit

Product Description

HVT150, HVT250 hydraulic shackle machine is mainly composed of the following components: two or three clamping cylinders form a back-up clamp, two or three clamping cylinders and a torque cylinder form a power clamp, an electric motor and a high-pressure plunger oil pump and oil pipes and quick connectors form a hydraulic system. It is used for quick shackle of drill pipes in trenchless horizontal directional drilling.

Product Parameters

HVT150 Main Technical Parameters
Opening	200mm
Clamping tube diameter	70-195mm
Shackle torque	150KN.M
Main clamping cylinder	400KN
Rear clamping cylinder	400KN
Torque cylinder	250KN
Pump station	380V/5.5KW
Pump flow	23L/min
Pressure	25MPA
Oil tank	80L
Working size	1000x600x1000mm
Approximate weight	800KG

HVT250 Main Technical Parameters
Opening	260mm
Clamping tube diameter	100-254mm
Shackle torque	250KN.M
Main clamping cylinder	500KN
Rear clamping cylinder	500KN
Torque cylinder	450KN
Pump station	380V/7.5KW
Pump flow	37L/min
Pressure	25MPA
Oil tank	120L
Working size	1300x600x1200mm
Approximate weight	1500KG

Installation Instructions

1. Add new hydraulic oil to the oil tank to the mark above.
2. The three-phase power supply wiring is correctly wired when the motor fan blade turns clockwise. The green switch is to start the motor, the red key is to turn off the power, and the air cooler power switch is switched on and off according to the hydraulic oil temperature.
a) Oil pipe connection, the two oil pipe quick connectors of group A are connected to the main clamp, and the two oil pipe quick connectors of group B are connected to the backup clamp. The two oil pipe quick connectors of group C are connected to the torque cylinder,
3. Push the A handle forward, the main clamp cylinder tightens the pipe column, and the A handle is pulled back to release the main clamp cylinder.
4. Push the B handle forward, the backup clamp cylinder tightens the pipe column, and the B handle is pulled back to release the backup clamp cylinder.
5. Push the C handle forward, the main clamp torque cylinder loosens the buckle, and the C handle is pulled back to tighten the main clamp torque cylinder.
6. Adjust the hydraulic system pressure to 10-30MPA, and adjust the pressure regulating valve on the multi-way valve as needed.
7. To replace the clamping teeth, use a hexagonal wrench to remove the lower jaw seat, and do not remove the clamping cylinder.
8. This operation is very important. After the work is completed, turn off the power, push and pull the A, B, and C handles forward and backward several times to release the hydraulic oil in the hydraulic pipeline. After the pipeline is free of pressure, unplug the quick connector.

Detailed Photos