| Matériel: | monel |
|---|---|
| Forme trou: | Carré |
| Demande: | Filtre , Grillage de Construction , Maille de Protection , Écran , Treillis Décoratif, Treillis de Clôture , Grillage de Barbecue , Rideau de Fenêtre , Cages |
| Technique Weave: | Armure Unie |
| Grillage Largeur: | 1m |
| Technique: | Tissé |
Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité | Product name | metal wire mesh,metal woven wire mesh |
| Special Material | copper,nickel,titanium,inconel,Monel, Hastelloy etc |
| Wire diameter | 0.018mm to 6.5 mm or customized |
| Pore hole size | 0.001mm to 20 mm |
| Mesh size | 0.3 mesh to 3500 mesh |
| Weave type | Plain Weave,Twill Weave,Dutch or 'Hollander' Weave,Plain Dutch Weave Twill Dutch Weave,Reverse Dutch Weave,Multiplex Weave. |
| Roll width | 0.3 to 10 meters |
| Roll length | 30 meters or customized |
| Processing services | Cutting/bending/welding and other services |
Nickel - Nickel is widely used in woven wire cloth as a corrosion resistant medium. It protects itself by forming a passive oxide film, thus resisting corrosion in many oxidizing environments. In today's industry, nickel is replaced with stainless steel when Possible for cost savings.
Monel - This alloy is essentially non-corrodible. Composed of 67% nickel, 28% copper and 5% others. Monel is more corrosion resistant than copper in oxidizing conditions and more resistant than nickel under reducing conditions. Monel has good strength characteristics and has traditionally been used in food processing. As with nickel, it can be replaced with stainless steel.
Alloy B - This alloy is used for corrosion resistance to hydrochloric acid in most concentrations and at temperatures up to the boiling point. It is not recommended for high temperature service.
Alloy C-276 - This alloy is well suited to corrosion resistance service against strong oxidizing agents such as ferric chloride and cupric chloride. Good elevated temperature properties in the 1600 to 1800 range Carpenter 20 Cb-3 - A corrosion resistant alloy especially useful against hot sulfuric acid. Not normally used for high temperature service.
Incoloy Alloy 800 - The nickel and chromium content here are similiar to Carpenter 20 Cb-3, while the copper and molybdenum content are reduced. Used in high temperature and corrosive environments.
Inconel Alloy 600 - 72% nickel and 15% chromium content makes Inconel 600 suitable for high temperature applications where corrosion resistance is important. Frequently used for heat-treating baskets. :
Nichrome - A 60% nickel and 15% chromium alloy used in certain chemical conditions at temperatures up to 1700. Contains 1% silicon which helps keep scaling to a minimum. Subject to carbide precipitating characteristics.
Nichrome V - Similar to Nichrome, this alloy has a higher nickel content - 80% nickel and 20% chromium. It is used in severe chemical conditions at elevated temperatures up to 2000
FeCrAl is a heat resisting alloy with excellent oxidation resistant characteristics. The addition of Yttrium inhibits scaling. This alloy has a maximum service temperature of 2430 F, but exhibits cold brittleness below 750-1200 F after service temperatures above 1000 F. Common uses are high temperature furnaces, radiant heaters, quartz heaters, and heating elements for toasters.
Weave Types
Hebei Aegis Metal Materials Co.,Ltd. can provide many different weaves to meet different application needs.the weave styles mainly depend on the mesh and wire diameter specifications of the woven mesh. Below are the show of some common styles we weave here.
Mesh, Mesh Count, and Micron Size
Mesh Count and Micron Size are some of the important terms in the wire mesh industry.
The Mesh count is calculated by the number of the holes in an inch of mesh, so the smaller is the woven holes the bigger is the number of holes.The Micron Size refers to the size of the holes measured in microns. (The term micron is actually a commonly used shorthand for micrometer. )
In order to make it easier for people to understand the number of the holes of the wire mesh, these two specifications are usually used together. This is the key component of specifying the wire mesh. The Mesh Count determines the filtering performance and function of the wire mesh.
Micron Size = size of mesh hole. (larger the micron size, larger the mesh hole)
More intuitive expression:
Mesh Count = number of mesh hole. (larger the mesh count, the smaller the mesh hole)
1
-We will provide all the details to you during the mass production.
-Customize your mould according to your need.
-Your requirements and complaints are highly respected.
-Necessary test and certification can be obtained as your request.
Q. Are you factory/manufacturer or trader?
We are direct factory who owns production lines and workers. Everything is flexible and there is no need to worry about extracharges by the middle man or trader.
Q. Can I get free samples?
If the sample is available, yes, can be free. If unavailable, need to customize.
Q. How long is the delivery time after payment?
Usual it is 3-5 days if the goods are available in stock. or it is 15-20 days if customized.
Q. What is your minimum order quantity?
Actually there is no MOQ for our products. But usually we recommend a quantity based on the price which is easy to accept.
Q. Which payment method you can accept?
Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Q. Can products customized?
Yes, all products can be customized as per your requirements.
Q. What about the package?
If wire mesh, paper tube+plastic/bubble film + paper tubes or wooden box +wooden pallet
If filter pack cap tube, everyone with plastic bubble film + carton or wooden box
Q. Can you do the customized Logo or drawing on our special package?
Yes, we can do logo or printing according to yours.
Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité 
