Two Component Thermal Epoxy Resin for Potting Compound Adhesive for Epoxy Floring

• N ° CAS.: 25068-38-6/68609-97-2
• Bonding Fonction: Adhésif structurel
• Morphologie: Liquid (State)
• Demande: Construction , revêtement de sol en époxy
• Matériel: Epoxy
• Classification: Réticulation à Température Ambiante
• N° de Modèle.: Epoxy-MM-1350
• Agent principal Composition: silane modifié
• Caractéristique: Résistance aux Intempéries
• Promoteur Composition: Tackifier
• Composition: Matière organique
• Couleur: Transparent
• composant: deux composants
• conditions de durcissement: traitement de l′humidité
• couleurs: Clear, Green, Grey, Blue, Red
• fonctionnalité 1: Anti-Slip & Antistatic
• fonctionnalité 2: Waterproof and Anti-Seepage
• fonctionnalité 3: Wear-Resistant and Corrosion-Resistant
• cov: ≤50g/L
• Paquet de Transport: Carton
• Spécifications: 5kg/20kg/25kg
• Marque Déposée: AEP
• Origine: Xiamen, China
• Code SH: 3506912000
• Capacité de Production: 10000 Tons

Description de Produit

About Products
Epoxy flooring resin is a two-component very clean floor decoration material with a smooth and smooth surface. It can be used in industries that have high requirements for floor cleanliness.


The main purpose
It is widely used on the floors of manufacturing workshops in medical, food, electronics, precision instruments, automobiles, etc. that have extremely high cleanliness requirements on the ground, as well as on cement floors or terrazzo floors in parking lots, hospitals, offices, etc.
 

Instructions for use
1.Before construction, the grass-roots level will be cleaned up, no dust, oil and other substances that affect the bonding strength.
2.This product can be used for spot gluing, the spot gluing area should be not less than 10% of the pasted area; you can also use the following 4mm tooth-shaped trowel to pull the teeth of the full scraping and paving, after the completion of the adhesive layer thickness of up to 3mm is good.
3.Adjustment should be completed within ten minutes after dispensing.
4.The product room temperature curing, surface drying time: 45Min, full curing time: 72h.
5.Application temperature range: -40ºC-+100ºC.

Precautions
1.Prohibit contact with water, steam, alcohol solvents (such as alcohol).
2.Construction temperature of 5-32 ºC is preferred.
3.We should wear gloves, masks, etc. for protection when using to prevent allergic reactions.
4.in order to prevent the liquid into the eyes caused by allergies, you can wear an eye mask when dispensing.
5.After construction, it is advisable to wash hands before drinking or eating to avoid ingesting glue components.
6.The product should be stored in a ventilated, dry, cool place, prevent direct sunlight, storage temperature 8-28 ºC.

Features:

1.Waterproof and anti-seepage

2.Wear-resistant and corrosion-resistant

3.Antistatic

4.Anti-slip

5.Pressure and impact resistance

6.High and low temperature resistance

7.Green

8.Strong adhesion, good flexibility, no falling off or cracking
 

[AEP] is a brand of Anbanb Group, which is specialised in adhesive research and development, production, application and optimisation of customer's usage solutions, serving microelectronics/electronics, industry, automotive, new energy, new home decoration, 3D printing and other fields.
The company takes customer as the centre, quality as the fundamental, innovation as the vitality, and is committed to developing into an adhesive enterprise trusted by customers. We have won the honours of National High-tech Enterprise, Xiamen High-tech Enterprise, Growing Enterprise, Speciality and New Enterprise, Intellectual Property Demonstration Enterprise, New Material Enterprise, and Demonstration Enterprise of Scientific and Technological Project Products.

Q1.:Can I get the Adhesive samples?
A1.:Sure,We can provide you free samples.

Q2.:How to find the most suitable product for me?
A2.:Please tell us about the use or application of the adhesive you are purchasing, and we        will recommend the right adhesive for you.

Q3.:Can you provide OEM service?
A3.:Yes, we can provide you with OEM service to customise your own branding and outer          packaging.

Q4.:What is your delivery time?
A4.:For OEM order,delivery in 20-30 days.

Q5.:What is your terms of payment?
A5.:30% deposit in advance,70% paid in before shipment.

Q6.:What is the shelf life of your product?
A6.:12 months.