Application: | Moteur, Moto, Machinerie, Marin, Machines agricoles, Industrial Robot |
---|---|
Fonction: | Change Drive Torque, Change Drive Direction, Changement de vitesse, Réduction de la vitesse |
Disposition: | Coaxial |
Dureté: | Trempé Tooth Surface |
Installation: | type de Vertical |
Étape: | Single-Step |
Fournisseurs avec des licences commerciales vérifiées
Connexion filetée de sortie, installation standard, utilisation universelle.
2.structure en porte-à-faux simple.conception simple,prix économique
3.travailler en continu. Faible bruit.
4.sortie à bride ronde, connexion inversée filetée, taille normalisée.
5.la rainure de clavette peut être ouverte dans l'arbre de force.
6.les spécifications de connexion de sortie sont complètes et il y en a beaucoup choix
7.jeu entre-dents 8-16 arcmin. Convient à la plupart des occasions.
Caractéristiques techniques | PRN60 | PRN80 | PRN90 | PRN120 | PRN160 | |||
Paramètres techniques | ||||||||
Max. Couple | Nm | couple nominal 1,5 fois | ||||||
Couple d'arrêt d'urgence | Nm | couple nominal 2,5 fois | ||||||
Max. Charge radiale | N | 240 | 400 | 450 | 1240 | 2250 | ||
Max. Charge axiale | N | 220 | 420 | 430 | 1000 | 1500 | ||
Rigidité en torsion | Nm/arcmin | 1.8 | 4.7 | 4.85 | 11 | 35 | ||
Vitesse d'entrée max | tr/min | 8000 | 6000 | 6000 | 6000 | 4000 | ||
Vitesse d'entrée nominale | tr/min | 4000 | 3500 | 3500 | 3500 | 3000 | ||
Bruit | DB | ≤58 | ≤60 | ≤60 | ≤65 | ≤70 | ||
Durée de vie moyenne | h | 20000 | ||||||
Efficacité de la pleine charge | % | L1≥96% L2≥94% | ||||||
Jeu de retour | P1 | L1 | arcmin | ≤8 | ≤8 | ≤8 | ≤8 | ≤8 |
L2 | arcmin | ≤12 | ≤12 | ≤12 | ≤12 | ≤12 | ||
P2 | L1 | arcmin | ≤16 | ≤16 | ≤16 | ≤16 | ≤16 | |
L2 | arcmin | ≤20 | ≤20 | ≤20 | ≤20 | ≤20 | ||
Table des moments d'inertie | L1 | 3 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 |
4 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 | ||
5 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 | ||
7 | Kg*cm2 | 0.41 | 0.65 | 1.42 | 11.38 | 34.02 | ||
10 | Kg*cm2 | 0.41 | 0.65 | 1.42 | 11.38 | 34.02 | ||
L2 | 12 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | |
15 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
16 | Kg*cm2 | 0.72 | 0.72 | 1.49 | 12.18 | 34.24 | ||
20 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
25 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
28 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
30 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
35 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
40 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
50 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
70 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
100 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
Paramètre technique | Niveau | Rapport | PRN60 | PRN80 | PRN90 | PRN120 | PRN160 | |
Couple nominal | L1 | 3 | Nm | 27 | 50 | 96 | 161 | 364 |
4 | Nm | 40 | 90 | 122 | 210 | 423 | ||
5 | Nm | 40 | 90 | 122 | 210 | 423 | ||
7 | Nm | 34 | 48 | 95 | 170 | 358 | ||
10 | Nm | 16 | 22 | 56 | 86 | 210 | ||
L2 | 12 | Nm | 27 | 50 | 96 | 161 | 364 | |
15 | Nm | 27 | 50 | 96 | 161 | 364 | ||
16 | Nm | 40 | 90 | 122 | 210 | 423 | ||
20 | Nm | 40 | 90 | 122 | 210 | 423 | ||
25 | Nm | 40 | 90 | 122 | 210 | 423 | ||
28 | Nm | 40 | 90 | 122 | 210 | 423 | ||
30 | Nm | 27 | 50 | 96 | 161 | 364 | ||
35 | Nm | 40 | 90 | 122 | 210 | 423 | ||
40 | Nm | 40 | 90 | 122 | 210 | 423 | ||
50 | Nm | 40 | 90 | 122 | 210 | 423 | ||
70 | Nm | 34 | 48 | 95 | 170 | 358 | ||
100 | Nm | 16 | 22 | 56 | 86 | 210 | ||
Degré de protection | IP65 | |||||||
Température de fonctionnement | ºC | - 10ºC à -90ºC | ||||||
Poids | L1 | kg | 0.95 | 2.27 | 3.06 | 6.93 | 15.5 | |
L2 | kg | 1.2 | 2.8 | 3.86 | 8.98 | 17 |
Fournisseurs avec des licences commerciales vérifiées