Info de Base
Service après-vente
Online Service, or Onsite Local Service
Format de fichier
ÉTAPE, IGES, STL, Obj
Connexion
SD Card, USB , WiFi
Précision
500-700 micromètres
imprimante Matériau
PLA, Plastique, Peek, Ultem, PPSU, PA/CF, PC, PC Alloys,PA,ABS,Car
Système opérateur
Windows 7
Max Print Size
500*500*700mm
Max Print Temperature
500 Degree
Max Chamber Temperature
150 Degree
Max Hotbed Temperature
180 Degree
Transportation Feature
Ball Screws and Linear Guide Rails
Bed Leveling
Automatic Leveling
Insulation Layer
3 Heat Insulation Layer
Extruder
2set, Independent Lifting
Layer Thickness
0.05-0.3 mm
Nozzle Diameter
O.4 mm for Standard, Available for
Platform
Vacuum Carbon Fiber Plate
Position Accuracy
X/Y: 12.5 μm Z: 2.5 μm
Supported Material
Peek, Ultem, PPSU, PA/CF, PC, P
Feacture
Built-in Camera, Automatic Nozzle Cleaning
Extruder Cooling
Liquid Cooling and Fan Air Cooing
Marque Déposée
OEM, can be custom
Paquet de Transport
Plywood Case, or Custom
Spécifications
500 degree extruder head
Description de Produit
High temperature 3D printer for PEEK, PEI, PPSU and other engineering materialLarge size High Performance 3D Printer HC-HT-MAXHC HT-MAX is a large-scale high-temperature 3D printer for printing high-performance materials, including PEEK, PEI, PEKK, PPSU, PEEK CF, PEEK GF, PEAK, etc.
With HT-MAX, you can print engineering material models with a maximum size of 500*500*700mm. Due to its high temperature setting, it can easily print strong polymers such as PEEK, and the printing success rate can be similar to that of ordinary ABS printing.HC-HT-MAX 3D printer parameter| Printing extruder |
| Print Technology | Fused Filament Fabrication [FFF] |
| Extruder Temperature | Up to 500ºC |
| Number of Extruders | 2 [Model & Support] |
| Cooling mode | Liquid cooling system |
| Nozzle lifting | Independent, interchangeable modules |
| Nozzle size | Standard 0.4 mm ,optional 0.2~1.0 mm |
| Layer resolution | 50 Microns |
| Heated build plate |
| Hot bed temperature | Up to 200 ºC |
| Print Bed plate | Vacuum adsorption carbon fiber board or composite film. |
| Build plate leveling | Automatic |
| Heated Chamber |
| Chamber temperature | Up to 150 ºC (Heating Actively ) |
| Heating method | Infrared heating |
| Chamber design | Fully enclosed with constant temperature control. |
| Chamber door | 2 layer glass, with air cooling system and lock. |
| Open Source Materials |
| Filament diameter | 1.75mm |
| Model Materials | PEEK, PEKK, PEI [Ultem™], PPSU, PP, PA66, PA12, PA6, PC, PC/ABS, PETG, ASA, ABS,PLA... |
| Support Materials | Water Soluble, Break Away |
| Specialty Grades | Carbon Fiber, Glass Fiber, ESD-Safe, Flame Retardant |
| Machine Properties |
| Build Volume | (X)500mm x (Y)500mm x (Z)700mm |
| Position Accuracy | X/Y 12.5 Microns
Z 6.25 Microns |
| Feeder system | Direct, Near end extrusion |
| Nozzle cleaning | Automatic |
| Camera | Built-in Camera |
| Machine Frame | Multi-layer insulation structure, metal frame |
| Control Panel | 7″ Color Touch Screen,multi-language. |
| Connectivity | USB , SD Card ,Wi-Fi. |
| Machine outer dimensions (xyz) | 1080*1380*1950mm |
| Net Weight | 680KG |
| Power | 220V,50~60 Hz , 4500W |
| Power Failure Recovery | Functions of the system |
| Filament Absent Warning | Functions of the system |
| Automatic shutdown function after printing | Functions of the system |
| Filament feeding case |
| Filament case drying temperature | 65 ºC |
| Maximum capacity | 2 rolls of 5kg/spool Filament |
| Self contained moisture-proof storage cabinet for filament |
| Humidity control | >10-15% |
| Requirements |
| Operating system(s) | Windows 7/8/10, 64 bit. |
| Slicing software | IEMAI 3D EXPERT, Compatible with other Slicing software like CURA,Simplify 3D,etc. |
| Optional Configuration |
| Filtration unit |
| UPS device (30min) |
Peek filament has a wide range of unique qualities. Therefore, peek has become a very interesting choice for many different industries. Peek has been used as one of the main materials in the medical, oil and gas, aerospace and automotive industries. It is an ideal choice for small batch production and professional design where it is difficult to use metal and traditional technology to create prototypes. PEEK has an excellent biocompatibility and close to bone modulus, which allow it to become a favorable material for implantation.
How to 3D printing PEEK
1. Sufficiently high temperature and reduce temperature fluctuation.
Peek can perform 3D printing in the temperature range of 370 degrees to 450 degrees. The bed temperature should always be kept at a minimum of 120 degrees. The temperature of the enclosed construction room shall not be lower than 90 ºC. HT-MAX can get 500 ºC nozzle temperature,150 ºC chamber temperature,200 ºC bed temperature. - Controlled crystallization
Usually, incorrect crystallization may occur during the printing process of PEEK materials. If the temperature is not controlled properly, it is difficult to get the crystallization effect you want. MAGIC-HT-MAX 3D printer has a closed chamber, so you don't have to worry about crystallization caused by temperature instability. 2. Keep peek filament dry
Please store peek in a cool, dry and dark place until it is used again,to maintain the quality of the material and ensure that the results of the printing process meet expectations. MAGIC-HT-MAX can bring a multifunctional moisture-proof cabinet that can control the environmental humidity, which is very suitable for storing PEEK filament.Superior Features of HT-MAX 3D Printer- Interchangeable printing extruder modules
There are two temperature extruder heads for you to choose, 500 ºC and 275 ºC. It is applicable to a variety of filaments, from PLA to PEEK on a single machine. You only need to replace the print module. 2. Dual extruders
HT-MAX adopts liquid cooled double printing heads, and the left and right extrusion heads can rise and fall independently.
Independent lifting Dual extruders so you can print support material in something other than PEEK, such as a soluble or break away material, for cost savings and easier removal. 3. Actively heated temperature stable printing chamber
The temperature of the active heating chamber can reach 150 ° C. It is very easy to print PEI, PEEK, ABS, PC and other engineering polymers for 3D printing.
The insulation chamber prevents heat from leaking from heating the internal space or from the machine. The quick heating chamber allows you to start printing without waiting for an hour or more. 4. PEEK Printers Can Print More Than PEEK.
It can print PEEK, which can handle other high-performance polymers with similar print size and high heat demand, such as PEAK, PEKK, PEI/ULtem, PPSU, etc. Of course, you can also reduce the heat to a low enough level by replacing the print head module. They can also deal with conventional ABS, PETG, PLA. The material is unlimited open source. 5. Other function
Vacuum adsorption Quick release carbon fiber plate or plastic film;
Printing liner infrared fast heating up
Auto bed leveling;
Power Failure Recovery
Filament Absent Warning
Automatic nozzle cleaning system
Built-in camera
Filament feeding case heated chamber
Self contained moisture proof filament cabinet
Support emergency stop
...If you have any doubt about our offer, please feel free to contact us, we will give you best solutions, thank you very much.
Adresse:
Room 3446, No. 106 Taixin Road, Wanjiang Street, Dongguan City, Guangdong Province, Dongguan, Guangdong, China
Type d'Entreprise:
Fabricant/Usine
Gamme de Produits:
Emballage & Impression, Instruments & Compteurs, Machinerie de Fabrication & de Façonnage, Outils & Quincaillerie, Équipement Industriel & Composants
Présentation de l'Entreprise:
Notre entreprise est située à Dongguan City, connu comme le "monde", avec l′usine de fabrication mis au point de l′industrie de fabrication de machines et de la chaîne logistique complète. Nous nous concentrons sur offrant aux clients avec un guichet unique des services liés aux imprimantes, y compris les imprimantes 3D, 3D de l′impression consommables, services d′impression 3D, accessoires et autres produits et services. Notre entreprise a pour but : la qualité est le fondement de la survie de l′entreprise, et l′innovation continue est la force motrice du développement des entreprises.
