Salle de polissage de voiture avec certificat CE

• Personnalisation: Disponible
• Service après-vente: 1 an
• Garantie: 1 an
• N° de Modèle.: LX-6-1-1
• Type: préparation
• Certificat: CE
• Substrat: Acier
• Marque: long xiang
• Revêtement: Revêtement en poudre
• Direction du flux d′air: Type de Courant Transversal
• Mode de chauffage: sans chauffage
• Peinture de traitement Mist: Type Sec
• État: Nouveau
• dimension intérieure: 6300*3450*2800mm(l*w*h)
• dimension extérieure: 7550*3550*3200mm(l*w*h)
• sous-sol: sans sous-sol
• système de ventilation: ventilateur centrifuge
• système d′éclairage: éclairage led
• tension: 380 v/220 v.
• puissance totale: 8,4 kw
• utilisation: polissage de voitures
• nom: station de préparation
• système de filtrage: filtre en fibre de verre
• verre: verre trempé
• fonction: polissage de voitures
• Paquet de Transport: forfait mer
• Spécifications: 7550*3550*3200mm(l*w*h)
• Marque Déposée: long xiang
• Origine: Chine
• Capacité de Production: 100

Description de Produit

Product Description

LX-6-1-1
Outside size	7550*3550*3400mm(L*W*H)
Inside size	6300*3450*2700mm(L*W*H)
Plenum size	6400*3550*380mm(L*W*H)
Basement system	-The basement is made of galvanized steel plate laser-cut and assembled with galvanized square tubes. 280mm high, the installation is standardized and durable; -equipped 5 rows of grills in the middle,Reasonable structure, sturdy and durable. The 30×4 flat steel grille of fixed-length steel plate is used to ensure load bearing, and it is galvanized and anti-rust.
Ramp	-2 ramps, 620*2000mm(W*L)/pc, Made of fully sealed pattern plate, powder coating with anti-rust treatment.
Lighting system	8*4pcs*16w LED high-efficiency energy-saving lamps,Galvanized sheet plastic sprayed light box shell,3C quality certification tempered glass transparent panel
Cabinet installation	The air is exhausted at the back, and the fan box is made of spray-coated profiles and steel plates with a protective film, which improves the anti-corrosion and rust resistance and prolongs the service life.
Ventilation system	-Cabinet size: 1300*1100*1900 mm (L*W*H),The super-large fan box can fully meet the exhaust needs of the grinding room;1*5.5kw YDW series double-intake centrifugal fans, air capacity:15000m³/h for each set ; Small size, large air volume, low noise, small vibration; heat and moisture resistance, durable.Electric damper control displacement exhaust volume
Heating system	Without
Glass	Lighting glass is tempered glass
Filtering system	Primary filter,high efficient filter,floor is Glass wool filter;-Grade G2 plate type,filtering rate>83%,produced with Italian technology,it can effectively capture dust particles larger than 10um -EU5 grade high efficient filter,produced with Netherlands technology,it can effectively capture dust particles larger than 4um,filtering rate≥99%, The filter cotton support adopts the embedded method, which is convenient for replacing the filter cotton.  -Multi-layer fiberglass filter,filtering rate>70%, Absorbs dust and particles from paint mist.
Ceiling plate	0.6mm galvanized ceiling plate
Control system	Control fan, lighting work.electric damper switch
Sealing system	With curtains on three sides, with wall panels at the back
Ceiling installation	Wire rope ceiling or column support
Voltage/Frequency	380V,50HZ,3 phase
Total power	6.7KW

 

Company Profile

 

Our Advantages