ACSR 25/4mm2 DIN 48204 ASTM Stranded Cable Hawk 477mcm ACSR Bare Conductors

• Type: Nu
• Type de conducteur: Écrin
• Demande: Aérien
• Matériau conducteur: Aluminium
• Matériau de la gaine: aucun
• Matériau isolant: aucun
• N° de Modèle.: ACSR Bare conductors
• Forme Matériel: Fil rond
• Domaine d′application: transmission de puissance
• Certificat: ISO9001, CE, CCC, RoHS, VDE
• Marque: jinshui
• surface de coupe nominale: 10 mm2
• tension de débit: vg, vm
• taille populaire: 50 mm, 100 mm, 150 mm
• expérience: 20 ans
• type d′entreprise: aac aaac acsr fabricant
• Paquet de Transport: Wooden Drum or Iron-Wooden Drum as Requirements
• Spécifications: BS, DIN, IEC, ASTM etc.
• Marque Déposée: JINSHUI CABLE
• Origine: Chine
• Code SH: 761410000
• Capacité de Production: 300000 Kilometers Per Month

Description de Produit

Product Description

1. Applications

Conductor(AAC, AAAC and ACSR) have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance, low cost large transmission capacity. And they are also suitable for laying across rivers valleys and the places where special geographical features exist.

2. Service Performance
(1). The permissible long-time operating temperature for aerial conductor is 70oC.
(2). Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3). When connecting conductors, the conductor beside the connecting tube cant be prominent. Otherwise, the force on the operating conductors will be unbalanced. After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4). Under installaion, the arc downing stress of all the conductors should be the same. With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress.

3. Product Performance
(1). The electrical performance of AAC and ACSR is indicated in DCΩ /km(20oC). The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ . M of international standard value.
(2). The rated tensile strength of AAC is denoted with the result of total cross-section of all aluminum conductors multiplied by min. Tensile of corresponding size specified in the standard for aluminum wire.
(3). The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.
A. The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min. Tensile strength of corresponding size specified in the standard for aluminum wire.
B. The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.

4. Material Standard
(1). The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997(equivalent to IEC 60889: 1987).
(2). The zinc coated steel wire used for ACSR conforms to IEC 60888: 1987.
(3). Production can be arranged according to customers requirements for material standard, etc.
Construction of All Aluminum Conductor and Aluminum Conductor Steel Reinforced
 

Code name	Aluminum Area		Stranding& Wire Diameter		Approx Overall Diameter	Approx Weight	Breaking Load	DC Resistance
			Al	Steel
	AWG	mm 2	No./mm	No./mm	mm	Kg/km	KN	Ohm/km
Turkey	6	13.30	6/1.68	1/1.68	5.04	53.75	5303	2.157
Swan	4	21.18	6/2.12	1/2.12	6.36	85.57	8302	1335
Swanate	4	21.12	7/1.96	1/2.61	6.53	99.56	10642	1352
Sparrow	2	33.59	6/2.67	1/2.67	8.01	135.70	12653	0.854
Raven	1/0	53.52	6/3.37	1/3.37	10.10	216.20	19455	0.536
Quail	2/0	67.32	6/3.78	1/3.78	11.30	272.00	23529	0.426
Pigeon	3/0	85.14	6/4.25	1/4.25	12.80	344.00	29417	0.337
Penguin	4/0	107.20	6/4.77	1/4.77	14.30	433.40	37055	0.268
Waxwing	266800	135.00	18/3.09	1/3.09	15.50	430.50	30519	0.213
Merlin	336400	170.20	18/3.47	1/3.47	17.40	542.90	38487	0.169
Linnet	336400	170.60	26/2.89	7/2.25	18.30	689.90	62918	0.169
Hawk	477000	241.6	26/3.44	7/2.67	21.80	975.50	86011	0.120
Dove	556500	282.6	26/3.72	7/2.89	23.6	1142.00	100838	0.1030
Peacock	605000	306.2	24/4.03	7/2.69	24.2	1159.00	95861	0.0948
Drake	795000	402.5	26/4.44	7/3.45	28.1	1626.00	138669	0.0717
Rail	954000	483.8	45/3.70	7/2.47	29.6	1602.00	115626	0.0597

 

AAAC Technical Characters Based on Standard BS EN50182
BS EN50182
Code	Old Code	Cross section	No. of wires	Diameter		Mass per unit length	Rated strength	DC resistance at 20
				Wire	Conductor
		mm2		mm	mm	kg/km	KN	Ω/km
19-Al3	BOX	18.8	7	1.85	5.55	51.4	5.55	1.7480
24-Al3	ACACIA	23.8	7	2.08	6.24	64.9	7.02	1.3828
30-Al3	ALMOND	30.1	7	2.34	7.02	82.2	8.88	1.0926
35-Al3	CEDAR	35.5	7	2.54	7.62	96.8	10.46	0.9273
42-Al3	DEODAR	42.2	7	2.77	8.31	115.2	12.44	0.7797
48-Al3	FIR	47.8	7	2.95	8.85	130.6	14.11	0.6875
60-Al3	HAZEL	59.9	7	3.30	9.90	163.4	17.66	0.5494
72-Al3	PINE	71.6	7	3.61	10.80	195.6	21.14	0.4591
84-Al3	HOLLY	84.1	7	3.91	11.70	229.5	24.79	0.3913
90-Al3	WILLOW	89.7	7	4.04	12.10	245.0	26.47	0.3665
119-Al3	OAK	118.9	7	4.65	14.00	324.5	35.07	0.2767
151-Al3	MULBERRY	150.9	19	3.18	15.90	414.3	44.52	0.2192
181-Al3	ASH	180.7	19	3.48	17.40	496.1	53.31	0.1830
211-Al3	ELM	211.0	19	3.76	18.80	579.2	62.24	0.1568
239-Al3	POPLAR	239.4	37	2.87	20.10	659.4	70.61	0.1387
303-Al3	SYCAMORE	303.2	37	3.23	22.60	835.2	89.40	0.1095
362-Al3	UPAS	362.1	37	3.53	24.70	997.5	106.82	0.0917
479-Al3	YEW	479.0	37	4.06	28.40	1319.6	141.31	0.0693
498-Al3	TOTARA	498.1	37	4.14	29.00	1372.1	146.93	0.0666
587-Al3	RUBUS	586.9	61	3.50	31.50	1622.0	173.13	0.0567
659-Al3	SORBUS	659.4	61	3.71	33.40	1822.5	194.53	0.0505
821-Al3	ARAUCARIA	821.1	61	4.14	37.30	2269.4	242.24	0.0406
996-Al3	REDWOOD	996.2	61	4.56	41.00	2753.2	293.88	0

Company Profile

Zhengzhou Jinshui Industry & Commerce Co.Ltd is located in the national class Zhengzhou high and new technology industries zone in Zhengzhou ,Henan province. We have owned a number of exclusive essential manufacture technologies and has pass ISO 9001 Quality Management Systerm ,ISO 14001 Environmental Management Systerm ,OHSAS18001 occupational Heath Management Systerm ,ISO 10012 Measurement Management Systerm and others from China and abroad.

We have been engaged in producing electric cable and wire for nearly 20 years, and  we are also 12 year gold supplier. And we are confident that we can offer the best service and quality for you .

Our product range is as following:
 *Bare conductors(AAC, AAAC, ACSR, Galvanized steel wire)
 *Aerial Bounded Cable (Duplex, Triplex,Quadruplex)
 * PVC insulated wire (Rated voltage to 450/750V)
 *THHN/THWN wire
 *PVC insulated Power Cable
 *XLPE insulated Power Cable 
 *Rubber sheathed Cable 
 *Control Cable
 *Welding Cable 
 *Cable AccessoriesWe take part in many fairs and exhibitions in China and abroad . Our aim is to be our customer's factory in Zhengzhou ,China . 
We are here to help you placing orders of cost-effective electric cable and keep tracking your products and shipment.

Our Factory

1,Professional production lines, experienced worker, ensure the production of every thing is fine and accurate.

2,We choose excellent raw materials carefully to ensure the quality and meet the need of customers.



3,Mechanical testing of Cables is done to determine the quality and mechanical characteristics  before delivery.

FAQ

 

1.Are you a manufacturer?

Yes, we are the manufacturer.

2.What are your main products?

Our products range as follows:

1. Electrical wire/PVC Building Wires.
2. PVC/XLPE insulated Power Cables up to 110kv.
3. Overhead Aerial Bundle Cable/ABC Cables.
4. Bare Conductors, like AAC, AAAC, ACSR, ACAR, ASCR/AW, and so on.
5. Steel wire/strand-like EHS, GSW and ACS(Aluminum Clad Steel), CCS(Copper Clad Steel).
6. Rubber Cables, Mining Cables, Welding Cable, and Control Cables.
7. Concentric Cables with Copper/Aluminum/Aluminum Alloy 8000s' Conductor.

3.Do you provide samples? Is it free or extra?

Yes, we could offer the samples for free

4.Is the quality of your products guaranteed?

We have passed ISO9001, ISO14001, ISO45001, and all our products have CE certificates.

5.Which markets do you involve mainly in?

Our products have been exported mainly to Africa, the Middle East, Southeast Asia, South America, Central America, North America, Europe, Australia, etc.

6. What is your payment term?

T/T,L/C,D/P D/A,Credit Card

 

Welcome your kind enquiry!