Type: | Tour |
---|---|
Standard: | AISI, ASTM, DIN, GB, BS |
Composition: | Nickel Alloy |
Technique: | Laminé à Chaud |
Forme: | Bar |
Traitement de surface: | Poli |
Fournisseurs avec des licences commerciales vérifiées
Grade | Inconel 718 - UNS N07718 |
Spécifications | ASTM B637 UNS N07718, ASTM B 637 / ASME SB 637, AMS 5662, AMS 5663, AMS 5664 |
Standard | ASTM, ASME, API, GB, AISI, DIN, EN, SUS, UNS ASTM B649 |
Inconel 718 taille de barre ronde | Diamètre : 3 mm à 800 mm |
Inconel 718 taille de la barre d'angle | 3 mm*20 mm*20~12 mm*100 mm*100 mm |
Inconel 718 barre carrée | 4 mm*4 mm~100 mm*100 mm |
Inconel 718 taille de barre plate | Épaisseur : 2 mm à 100 mm |
Largeur : de 10 mm à 500 mm | |
Taille de barre hexagonale Inconel 718 | 2 mm à 100 mm |
Inconel 718 taille de la billette | Diamètre de 1/2" à 495 mm |
Taille des rectangles Inconel 718 | 33 mm x 30 mm à 295 mm x 1066 mm |
Terminer | Brillant, poli, brillant, rugueux tourné, meulage, Sans centre, sol et noir |
Tolérance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 ou selon les exigences du client |
Surface | Laminé à chaud, pickled ou sablage fini, étiré à froid, brillant, poli, ligne à cheveux |
État | À froid, à traction à froid, sans centre, rectifié et poli, barre ronde recuite |
Technique | Inconel 718 laminé à chaud, laminé à froid, étiré à froid, barre ronde forgée, tige |
Forme | Rond, tige, barre de mise à la terre de précision, carré, tige ronde, Creux, hexagonal (A/F), Triangle, Rectangle, fileté, Barre en T, barre demi-ronde, barre plate, anneaux, blocs, Billette, ergot, barre d'I/H, angle, barre de canal, Profils, forgeage, etc. |
Type | DIMENSIONS (mm) | DIMENSIONS (pouces) | Tolérance ISO |
Étiré à froid et polonais | 3.00 - 75.00 | 1/8" - 3.00" | h8-h9-h10-h11, ASTM B637 |
Étiré à froid et rectifié | 10.00 - 75.00 | 5/6" - 2.50" | h8-h9-h10-h11 |
Pelées et polies | 40.00 - 150.00 | 1.50 po - 6.00 po | h11, ASTMA-484 h11-DIN 1013 |
Pelées et meulées | 20.00 - 50.00 | 3/4″ - 2.00" | h9-h10-h11, ASTM B637 |
Type | Laminé à chaud, étiré à froid, trempé à l'huile, traitement thermique |
Standard | GB, AISI, ASTM, DIN, EN, SUS, UNS |
Epaisseur | 0.04 mm |
Largeur | 5 mm |
Prix de l'article | EXW, FOB, CIF, CFR, DDP, ETC |
Matériau | Inconel: Inconel100 Inconel 600 Inconel 601 Inconel602CA |
Inconel 617 Inconel 625LCF Inconel 686 Inconel 690 | |
Inconel 718 Inconel 725 Inconel X-750 | |
Hastelloy : Hastelloy B. Hastelloy B-2 Hastelloy B-3 Hastelloy C | |
Hastelloy C-22 Hastelloy C -4 Hastelloy C-276 | |
Hastelloy C-2000 Hastelloy G Hastelloy G-30 | |
Hastelloy G-35 | |
Monel : Monel 400 Monel 401 Monel 404 Monel R405 | |
Monel K-500 | |
Nickel : nickel 200 Nickel 201 Nickel 205 | |
Nimonic : Nimonic 75 Nimonic 80A Nimonic 90 Nimonic 105 | |
Nimonic 115 Nimonic 901 | |
Udimet: Udimet 188 Udimet 720 Udimet R41 Udimet 300 | |
Haynes : Haynes 230 Haynes 556 Haynes 188 | |
Incoloy: Incoloy 800 Incoloy 800H Incoloy 800HT Incoloy 825 | |
Incoloy 925 Incoloy 926 | |
GH : GH2132 GH3030 GH3039 GH3128 | |
GH4180 GH3044 | |
Alliage : alliage 20/28/31; | |
Série 200 : 201 202 202Cu,204 Cu, | |
Série 300 : 301,303/Cu,304/L/H,304Cu,305,309/S,310/S,316/L/H/Ti,321/H,347/H,330, | |
SÉRIE 400 : 409/L, 410,416/F, 420/F, 430,431,440C, 441,444,446, | |
Série 600 : 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D, | |
S32760, 2304, LDX2101, LDX2404, LDX4404,904L ; | |
Autres: 254SMo,253Ma,F15,Incar36,1J22,N4,N6 etc | |
Délai de livraison | 5-30 jours après la confirmation de la commande, selon la quantité du client. |
Paiement | L/C, T/T. |
Fournisseurs avec des licences commerciales vérifiées