Material: | High Impact Polystyrene/HIPS |
---|---|
Usage: | General Plastics |
Plastic Properties After Heated: | Thermoplastic Plastics |
Plastic Forming Method: | Film/Blow/Injection/Extrution |
Color: | Transparence |
type: | hanches 7240 |
Fournisseurs avec des licences commerciales vérifiées
Total | ||
État du matériau | ?Valide actuel | |
Caractéristiques de performances | ?L'admissibilité de l'alimentation contact | |
La méthode de transformation | ?De moulage par extrusion | |
L'apparence | ?Transparent | |
L'application | ?L'emballage, feuille | |
Une propriété physique | Cote | Méthode de test |
La densité | 1.04g/cm3 | La norme ISO 1183 |
MFR(200ºC/5.0kg) | 4,5 g/10min | La norme ISO 1133 |
Propriété mécanique | Cote | Méthode de test |
La contrainte de traction au rendement | 23.0 MPa | La norme ISO 527-2 |
La contrainte de traction à la rupture | 21.0 MPa | La norme ISO 527-2 |
Module de traction | 1950 MPa | La norme ISO 527-2 |
Résistance en flexion | 1850 MPa | La norme ISO 178 |
Propriété d'impact | Cote | Méthode de test |
L'encoche la résistance au choc(23ºC) | 11.0kJ/m2 | La norme ISO 180/lA |
Propriété thermique | Cote | Méthode de test |
Point de ramollissement Vicat | 97.0ºC | La norme ISO 306/A50 |
Point de ramollissement Vicat | 87.0ºC | La norme ISO 306/B50 |
La chaleur température de déformation(1.8MPa, unannealed) | 74.0ºC | L'ISO 75-2/A |
La chaleur température de déformation(1.8MPa, recuit) | 90.0ºC | L'ISO 75-2/A |
La chaleur température de déformation(1.8MPa) | 89,5 ºC | L'ISO 75-22 |
Fournisseurs avec des licences commerciales vérifiées