Matériel: | Polyéthylène à Haute Densité/ HDPE |
---|---|
Usage: | Plastique Générale |
Propriétés plastique après chauffée: | Thermoplastiques plastiques |
Procédé de formage plastique: | Film/Blow/Injection/Extrusion |
Couleur: | Blanc |
type: | hdpe |
Fournisseurs avec des licences commerciales vérifiées
Propriétés |
Unité | Méthode de test | Valeur |
Faire fondre le débit | |||
Faire fondre le débit(230 °C/2,16 kg) | G/10min | La norme ISO 1133 | ≤1,0 |
Propriétés Mechnical | |||
Module d'élasticité en traction(v=1mm/min) | Mpa | La norme ISO 527-2 | 1550 |
Rendement de traction au stress(v=50mm/min) | Mpa | La norme ISO 527-2 | 35 |
Rendement de traction à la souche (V=50mm/min) | % | ISO527-2 | 8 |
Traction à la rupture (V=50mm/min) | % | La norme ISO 527-2 | >50 |
Résistance au choc Charpy unnotched(+23°C) | KJ/m2 | 179/1ISO UE | 110 |
Résistance au choc Charpy encoché(+23°C) | KJ/m2 | 179/1ISO UE | 3.0 |
Résistance au choc Izod notenched(+23°C) | KJ/m2 | 180/1ISO UNE | 3 |
La bille indentation 358/30 dureté(H) | Mpa | L'ISO 2039-1 | 78 |
Propriétés thermiques | |||
Point de fusion,DSC | °C | La norme ISO 3146 | 163 |
La chaleur température de déformation ------------HDT/B(0,45 Mpa) | °C | L'ISO 75-2 | 85 |
Température de ramollissement Vicat ------------VST/A50(10N) | °C | La norme ISO 306 | 154 |
D'autres propriétés | |||
La densité | G/cm3 | La norme ISO 1183 | 0.91 |
Fournisseurs avec des licences commerciales vérifiées