Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité Production process of glazed tile unit
The products of the production line are carried out according to the following technological process:
Uncoiling → cold bending molding → press table & cut off → discharge.
Roll forming unit of Glazed tile production line
Purpose: It is used to achieve the desired interface shape through the roll bending process.
Structure: the forming unit adopts motor, reducer and reducer drive.
Forming machine archway for independent archway structure (not plate structure), stable performance, reliable, high precision.
Lower shaft drive, if necessary lane up and down shaft using synchronous gear.
The base is welded steel structure. Annealing after welding.
The forming roller is designed by professional software. The material is made of high quality 45 steel and hard chrome plating.
Equipped with 1 set of rollers.
Parameters: molding times: 16 (subject to the final design)
Shaft diameter of molding machine: φ70
Motor power: 5.5KW
Maximum linear speed: 2~5m/min
Main technical parameters of Step Tile Roof Roll Forming Machine
Material quality: color steel plate, aluminum plate
Yield strength of raw materials: ≤ 235MPa
Tensile strength of raw materials: ≤550Mpa
Coiling material outside diameter: ≤Ф1300 mm
Inner diameter of coil: Ф508
Width of steel belt: 1000mm
Thickness of steel belt: 0.2~0.4mm
Single roll weight: ≤5000 kg
Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité 
