Sécheur d′air de fluide réfrigérant (LGRD)

Operation condition and Technical index
Inlet temperature: Less than 80 centigrade
Cooling mode: Water-cooling
Inlet pressure: 0.4-1.0Mpa
Pressure loss: Less than 0.03MPa
Pressure dew point: 2~10 centigrad
Refrigerating fluid: R22
Inlet temperature of cooling water: Less than 32 centigrad
Inlet pressure of cooling water: 0.2~0.4Mpa
Operation condition and Technical index
- The refrigeration system is well equipped; And the most important elements of the machinery adopt import the famous brand products, which can make sure the treatment effect and the reliability service and the life span of the system.
- The refrigeration system and air system are accurately calculated by the experts; And all designed value keep more than 20% margin.
- The gas and the liquid separate thoroughly. Adopts filter type gas-liquid separator with American HANKISON filter core, so that the gas and the liquid can separate thoroughly and prevent the moisture from evaporating at the second time, and guarantee the cooling dryers reach the best drying effects, with 99.99% separation efficiency, much higher than the cyclone separator.
- The pipe system adopts copper tube with zinc inner plating; And the working pressure from 0.3 MPa to 4.5MPa are available.
- Select stainless steel pipeline, which is acid-proof, alkali-proof, anticorrosion, suitable for the medicine and food industry.
- The air heat exchanger adopts copper pipes with ripples at the inner and outer walls, which increases availability of cooling capacity; And the structure of counter flow type, with perfect thawing and non-condensing effect.
- The evaporator adopts the copper tube with pure aluminum fin after hydrophilic treatment and the turbolator structure with high heat exchange efficiency.
- With good drain contamination system, the air dryer adopts more than three-stage drainage, which can discharge substantial condensate water and greasy dirt effectively, so that it can guarantee the system and the atmosphere clean and dry, and also decrease the load of the system.
- Adopts control wirings of diversified forms (single, centralized control, untouch, PC panel, frequency translation), which is suitable for different users.
- The cooling fans of outer rotors are of large air volume, low noise, long lifetime, can be switched on and off frequently.
- The water condenser adopts low finned copper tube, of slow current, many strokes, high heat exchange effectiveness, which is not hard to deposit after long use.
- Adopts Armstrong heat insulating materials, of foam coating and flame retardant, cooling capacity dissipates at least.
- Protection Grade: IP54 (dustproof and shockproof)