DIN69871 SK50 AD/B-FMB32-60mm Face Mill Arbor Shell Mill Arbor
Material:40Cr
Hardness:HRC52-58
Thread:M24x3.0
Form AD/B G6.3 12000rpm balanced
Face Mill arbors are used to hold milling cutters from diameter 40 and are used in a large range of rough milling and fine milling applications with good cutting performance and surface finish.
What is the difference between a shell mill and a face mill?
Also, drills typically have only two flutes, whereas end mills often have four or more. Where a face mill removes material from the workpiece's top surface, an end mill (and its larger cousin, the shell mill) removes it from the part's periphery, as well as from the inside of a pocket (or pockets) within the part.
What is the purpose of a face mill?
Face milling is a process used to cut material from the top face of a workpiece. Face milling is done using a milling machine or a machine center, and uses an end mill, fly cutters, or shell mill tools. All of these tools achieve a similar result, which is to remove material from the top surface of a workpiece
What is an example of face milling?
Workpieces made of different materials can also be machined with face milling cutters. The combination of solid wood and acrylic or epoxy resin is an example for spectacular table tops and cupboard doors. The panels are prepared for finishing using the face milling machine.
Fournisseur Audité 
