| Demande: | Isolateur , Isolation de Bobinage Électrique , Isolation d′Enduit d′Enroulement de Fil , Base Électrique，Coquille , Moteur , Vernis Isolant , Plaque de Base de Commutateur , barres de bus |
|---|---|
| Type: | Manchon d′isolation et tube |
| Chimie: | Isolation Hybride |
| Matériel: | ptfe |
| Note thermique: | 260c |
| Tension maximale: | <10KV |
Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité Direct Sale PTFE Tube Teflonto Pipe Bowden Extruder 1.75mm ID2mm OD4mm with Cutter Filament Tube for Ender3
1.Model NumberSB-PTFE
2. Working Temperature
-80ºC~+260ºC
3. Properties
1.Excellent Chemical and Corrosion Resistance;
2.Ultra-pure, documented biocompatibility;
3.Fully characterized to all current standards;
4.Non-cytotoxic, non-pyrogenic and non-hemolytic;
5.Extremely low sorption characteristics compared to other flexible tubings;
6.Fully autoclavable and sterilizable;
7.Excellent barrier with very low permeability;
8.Super smooth surface, Non-stick, Easy clean;
9.Self lubricating, good transmission of ultraviolet rays;
10.Excellent dielectric strength;
4. Application
1.Sterile filling and dispensing systems 2.Diagnostic equipment;
3.General laboratory use; 4.Cell and tissue culture transport;
5.Analytical and process equipment in biotechnology, pharmaceutical and environmental fields;
6.Sight-glasses & colored paint delivery systems;
5.Dimension
| AWG | I.D.(mm) | O.D.(mm)(S) | O.D.(mm)(T) | O.D.(mm)(L) | Standard Package |
| (meter/roll) | |||||
| 30 | 0.30±0.10 | 0.80±0.10 | 0.70±0.10 | 0.64±0.10 | 305 |
| 28 | 0.38±0.10 | 0.88±0.10 | 0.78±0.10 | 0.72±0.10 | 305 |
| 26 | 0.46±0.10 | 0.96±0.10 | 0.86±0.10 | 0.80±0.10 | 305 |
| 24 | 0.56±0.10 | 1.16±0.10 | 1.06±0.10 | 0.90±0.10 | 305 |
| 23 | 0.66±0.10 | 1.26±0.10 | 1.16±0.10 | 1.00±0.10 | 305 |
| 22 | 0.71±0.10 | 1.31±0.10 | 1.21±0.10 | 1.05±0.10 | 305 |
| 21 | 0.81±0.10 | 1.41±0.10 | 1.31±0.10 | 1.15±0.10 | 305 |
| 20 | 0.86±0.10 | 1.66±0.10 | 1.46±0.10 | 1.20±0.10 | 305 |
| 19 | 0.96±0.20 | 1.76±0.20 | 1.56±0.20 | 1.30±0.20 | 200 |
| 18 | 1.07±0.20 | 1.87±0.20 | 1.67±0.20 | 1.41±0.20 | 200 |
| 17 | 1.19±0.20 | 1.99±0.20 | 1.79±0.20 | 1.53±0.20 | 200 |
| 16 | 1.34±0.20 | 2.14±0.20 | 1.94±0.20 | 1.68±0.20 | 153 |
| 15 | 1.50±0.20 | 2.30±0.20 | 2.10±0.20 | 1.84±0.20 | 153 |
| 14 | 1.68±0.20 | 2.48±0.20 | 2.28±0.20 | 2.08±0.20 | 100 |
| 13 | 1.93±0.20 | 2.73±0.20 | 2.53±0.20 | 2.33±0.20 | 100 |
| 12 | 2.16±0.25 | 2.96±0.25 | 2.76±0.25 | 2.56±0.25 | 100 |
| 11 | 2.41±0.25 | 3.21±0.25 | 3.01±0.25 | 2.81±0.25 | 150 |
| 10 | 2.69±0.25 | 3.49±0.25 | 3.29±0.25 | 3.09±0.25 | 150 |
| 9 | 3.00±0.25 | 4.00±0.25 | 3.80±0.25 | 3.40±0.25 | 150 |
| 8 | 3.38±0.25 | 4.38±0.25 | 4.18±0.25 | 3.78±0.25 | 100 |
| 7 | 3.76±0.25 | 4.76±0.25 | 4.56±0.25 | 4.16±0.25 | 100 |
| 6 | 4.22±0.25 | 5.22±0.25 | 4.92±0.25 | 4.80±0.25 | 100 |
| 5 | 4.72±0.25 | 5.72±0.25 | 5.42±0.25 | 5.32±0.25 | 50 |
| 4 | 5.28±0.30 | 6.28±0.30 | 6.02±0.30 | 5.88±0.25 | 1 |
| 3 | 5.94±0.30 | 6.94±0.30 | 6.74±0.30 | 6.54±0.25 | 1 |
| 2 | 6.68±0.30 | 7.68±0.30 | 7.48±0.30 | 7.28±0.25 | 1 |
| 1 | 7.46±0.30 | 8.46±0.30 | 8.26±0.30 | 8.06±0.25 | 1 |
| 0 | 8.38±0.30 | 9.38±0.30 | 9.18±0.30 | 8.98±0.25 | 1 |
| Inner diameter | O.D.(mm) WT=0.5mm |
O.D.(mm) WT=1mm | O.D.(mm) WT=1.5mm |
O.D.(mm) WT=2.0mm |
| 1 | 2±0.10 | 3±0.10 | 4±0.10 | 5±0.10 |
| 2 | 3±0.10 | 4±0.10 | 5±0.10 | 6±0.10 |
| 3 | 4±0.10 | 5±0.10 | 6±0.10 | 7±0.10 |
| 4 | 5±0.10 | 6±0.10 | 7±0.10 | 8±0.10 |
| 5 | 6±0.10 | 7±0.10 | 8±0.10 | 9±0.10 |
| 6 | 7±0.10 | 8±0.10 | 9±0.10 | 10±0.10 |
| 7 | 8±0.10 | 9±0.10 | 10±0.10 | 11±0.10 |
| 8 | 9±0.10 | 10±0.10 | 11±0.10 | 12±0.10 |
| 9 | 10±0.20 | 11±0.20 | 12±0.20 | 13±0.20 |
| 10 | 11±0.20 | 12±0.20 | 13±0.20 | 14±0.20 |
| 11 | 12±0.20 | 13±0.20 | 14±0.20 | 15±0.20 |
| 12 | 13±0.20 | 14±0.20 | 15±0.20 | 16±0.20 |
| 14 | 15±0.20 | 16±0.20 | 17±0.20 | 18±0.20 |
| Item | Standard | Item | Standard |
| Relative Density | 2.14~2.20 | Melting Point (ºC) | 327 |
| Tensile Strength (MPa) | ≥25 | Operating Temperature (0C) | -80~260 |
| Stretch Yield Strength (MPa) | ≥11 | Oxygen index(%) | >90 |
| Elongation (%) | ≥300 | Water Absorption (%) | <0.01 |
| Arc Resistance | >300 | Linear Expansion Coefficient (×105/ ºC)21~1000C | 10 |
| Shore Hardness (D) | 59~63 | breakdown strength (kv/mm) | ≥45 |
| volume resistance (Ω.cm) | 1×1016 |
Direct Sale PTFE Tube Teflonto Pipe Bowden Extruder 1.75mm ID2mm OD4mm with Cutter Filament Tube for Ender3
1) 3~5 workdays of delivery
2) 2 years quality guarantee
3) prompt feedback
4) 24hrs on line service
7.Certification
8. About Sunbow
1) 10-year exporting experience
2) 15-year manufacturing experience
3) ISO9001:2008 approved
4) product certifications: CUL (E333178---UZIQ2 VW-1; E333177---UZFT2/8 200C 600V)
5) business partners: Toshiba, Samsung, Philips, Midea, ECI, Zoppas
Direct Sale PTFE Tube Teflonto Pipe Bowden Extruder 1.75mm ID2mm OD4mm with Cutter Filament Tube for Ender3
Q1. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q2. How about your delivery time?
A: Generally, it will take 20 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q4. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q6: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité 
