| Personnalisation: | Disponible |
|---|---|
| Service après-vente: | réparation dans un délai de trois ans |
| Certification: | CE, ISO, FDS |
|
Vous hésitez encore ? Obtenez des échantillons $ !
Commande d'Échantillons
|
| Frais de livraison: | Contactez le fournisseur au sujet du fret et du délai de livraison estimé. |
|---|
| Modes de Paiement: |
|
|---|---|
| Paiements de soutien en USD |
| Paiements sécurisés: | Chaque paiement que vous effectuez sur Made-in-China.com est protégé par la plateforme. |
|---|
| Politique de remboursement: | Réclamez un remboursement si votre commande n'est pas expédiée, est manquante ou arrive avec des problèmes de produit. |
|---|
Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité Audité par une agence d'inspection indépendante
The butyl waterproof sealing tape,which is made from butyl rubber,polyisbutene and other raw materials,is an environmental solvent-free and self-adhesive sealing material that is produced on the base of the special formula,new compounding vulcanization technological and high polyer material and by means of special technological process
Specification
The product are provided with single face one (covered with aluminum foil and non-woven fabrics,PE film ,ect)and double face one (with no base material ,and with gridding cloth)
Thickness:0.5mm-3mm,maximum width is 1m,it can also be customized according to the customer's demand
|
ITEM
|
MEASUREMENT
|
TEST METHOD
|
|
Tensile Strength
|
0.7kgf/cm2
|
JIS K 6301 500MM/MIN
|
|
Water resistance
|
No deterioration ,No fat separation,Water absorption>0.028
|
20ºC water, 168 Hr
|
|
Heat resistance
|
no hanging,No fat separation, No deterioration
|
5mm*5mm*100mm on Vertical steel plate,110ºC 168Hr
|
|
Holding power
|
slide is 0.5mm
|
2mm*50mm*50mm on Vertical steel plate,100ºC 168Hr
|
|
Cold resistence
|
no craking, no slide
|
5mm*5mm*100mm on Vertical steel plate,-30ºC 24Hr
|
|
Offensive smell
|
on offensive smell
|
10g in 1 liter glass tubes, 24Hr
|
Main uses
For the waterproofing work of the roofing ,underground and structural construction joint of new projects,as well as the lap joint and sealing of high polymer waterproof roll
For the sealing and waterproofing work of the structural construction joint of subway tunnels
For the gas tightness ,water tightness and shock absorption of the joint of colorful contour plate,as well as the gas tightness,water tightness and shock absorption of the joint of the polycarbonate sheet engineering
For the bonding and sealing work for the assembly and installation of vehicles
For the waterproof and sealing work for the joint of the steel structure construction
The butyl rubber tapes that covers the aluminum foil is fit for the waterproofing and sealing for various of kinds of the roofing engineering,color steel,steel structure and waterproof roll and PC sheet which are exposed to the sunshine
Technological characteristics
Convenient and efficient construction:to use the butyl sealing tape,it shall be bonded once and for all ,and the surface of the base layer shall be clean
Broad requirement on construction environment :it can be operated normally within -15 degree centigrade and 45degree centigrade of environment temperature and below 80 percent of humidity,and it has strong environment suitability
Simple and reliable repair technology:for the large leakage part,only the single -face tape to be used
Product features
Excellent mechanical properties:high bonding strength and tensile strength ,good elasticity and extension performance,strong adaptability of the shape change and crack of the interface ,and good ability to trace the shape change of the substance
Stable chemical properties:it's equipped with excellent chemical resistance ,weather fastness and corrosion resistance
Reliable application performance :excellent binding property ,water resistance ,leak tightness and low temperature resistance ,and high stability in size
Easy operation technology
Wide Usage
Construction method
Construction method of the new engineering of steel Structure roofing
Select the proper specification according to the shape of the metal plate or the gap and joint of the bonded pat and in line with the requirement of the engineering design
Clean the bonded part of the metal plate
Uncover the double-face rubber tape slowly from one end of the metal plate,and stick the sealing tape to the lap joint of the lower layer of metal plate along the straight line of the joint,then ,press the tape gently with your hand,so as to make it stick fast to the metal plate
Tear the release paper on the butyl sealing tape ,and press the metal plate on the upper layer of the interface into the bonded and sealed tightly
Fix and tight the screw ,and make the upper and lower bonding surface of the tape bonded tightly
Stipulations of construction
The stipulation apply to the sealing and waterproofing work of the roofing and metal plate of civil engineering structure that uses the rubber tape for the bonding the waterproof roll,metal contour plate,PC plate and other supporting materials
To design and use the rubber tape ,the relevant regulations and the enterprise standard of the company shall be followed
1.Q : Are you a factory or trading company ?
A: We are a factory , can offer best quality product ,reasonable price and supply the stable quality adhesive tape for you.
2.Q: Can you do OEM?
A: Yes, we can do OEM products. Send us your requirement details now.
3.Q:How can I get some samples?
A: We are honored to offer you free samples. New clients are expected to pay for the courier cost, the samples are free for you, this charge will be deducted from the payment for formal order.
4.Q:What about the payment?
A:30% deposit in advance, 70% balance againstcopy of B/L, by T/T, Cash or 100% LC at sight.
5.Q:What's our normal Trade Terms?
A:EXW, FOB, CIF, CNF, DDU, L/C ect.
6.Q:How long is the lead time?
A:Normally within 5-25 days after deposit received.
8.Q:How to control your quality?
A:All of our products can meet the UL,VW-1,MSHA,BS 2576 certificates.We have complete quality guarantee system: IQC FAS &Self checking for
each producing progress →OQC. And as below:
1). Before production: sending pre-production samples for checking.
2). During production: sending mass production samples for checking again.
3). Before shipment: customers' or the third parties' visit to our factory to check the quality directly or any inspection is welcome!
4). After shipment: if there is any problem of our goods due to our mistake,we will surely be responsible for it.
9.Q:How to guarantee punctual shipment for my order?
A:We give priority to export orders and keep updating progress from production to delivery.
10.Q:If we don't have shipping forwarder in China, would you do this for us?
A:Yes, we can offer you best shipping line to ensure you can get the goods timely at best price
11.Q:How can we get detailed price list?
A:Please offer us detailed information of the product such as Size(length,width,thickness),color,specific packaging requirements and purchasing quantity.
