| Usage: | Réfrigérateur, Climatisation, Nourriture , Cuisine , Pharmaceutique , Label ＆ Étiquette , Câble |
|---|---|
| Type: | Rouleau |
| Humeur: | Souple |
| Traitement: | Bright |
| Épaisseur: | Double Zéro Foil |
| Etat de Surface: | Double lumière Aluminium Foil |
Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité 
1000 series
On behalf of 1000 series aluminum plate is also known as pure aluminum plate, in all series 1000 series belongs to a series
containing the most aluminum. The purity can reach more than 99.00%. Because it does not contain other technical elements,
the production process is relatively simple and the price is relatively cheap. It is the most commonly used series in the
conventional industry at present. Most of the 1050 and 1060 series are in circulation in the market. The minimum aluminum
content of 1000 series aluminum plate is determined according to the last two Arabic digits of this series, such as the last two
Arabic digits of 1050 series is 50. According to the international brand naming principle, the qualified product must contain
more than 99.5% aluminum. China's aluminum alloy technical standard (gB/T3880-2006) also clearly stipulates that the
aluminum content of 1050 is up to 99.5%. In the same way, the aluminum content of 1060 series aluminum plate must reach
more than 99.6%.
2000 series
2A16 (LY16) 2A06 (LY6) 2000 series aluminum plate is characterized by high hardness, among which the content
of copper is the highest, about 3-5%. 2000 series aluminum plate belongs to aviation aluminum material, is not often
used in conventional industry. Our manufacturers of 2000 series aluminum plate are less. The quality cannot be
compared with abroad. The imported aluminum sheet is mainly supplied by Korean and German manufacturers.
With the development of Chinese aerospace industry, the production technology of aluminum plate in 2000 series
will further improve.
3000 series
Indicates 3003 3003 3A21. It can also be called rust-proof aluminum plate. Our production process of 3000 series
aluminum plate is excellent. 3000 series aluminum plate is made of manganese element as the main component.
The content is between 1.0 and 1.5. It is a series with good anti-rust function. Commonly used in air conditioning,
refrigerator, car under humid environment, price is higher than 1000 series, is a more commonly used alloy series.
4000 series
The aluminum plate representing 4A01 4000 series belongs to the series with higher silicon content.
The silicon content is usually between 4.5-6.0%. Construction materials, mechanical parts, forging materials,
welding materials; Low melting point, good corrosion resistance Product Description: With heat and wear resistance
5000 series
Stands for 5052.5005.5083.5A05 series. 5000 series aluminum plate belongs to the common alloy aluminum plate
series, the main element is magnesium, the magnesium content is between 3-5%. Also known as aluminum
magnesium alloy. The main characteristics are low density, high tensile strength and high elongation.
The weight of aluminum magnesium alloy under the same area is lower than that of other series. Often
used in aviation, such as aircraft fuel tanks. It is also widely used in conventional industry. The processing
technology is continuous casting and rolling, which belongs to the hot rolled aluminum plate series, so it can
do oxidation deep processing. In our 5000 series aluminum plate belongs to one of the more mature aluminum
plate series.
6000 Series
Represents 6061 mainly contains magnesium and silicon two elements, so concentrated the advantages of
4000 series and 5000 series 6061 is a cold treatment aluminum forging products, suitable for corrosion
resistance, oxidation requirements of high applications. Good usability, excellent interface characteristics,
easy coating, good processing. Can be used in low pressure weapons and aircraft joints.
General characteristics of 6061: excellent interface characteristics, easy coating, high strength,
good usability, strong corrosion resistance.
Typical uses of 6061 aluminum: aircraft parts, camera parts, couplers, Marine fittings and hardware,
electronic fittings and joints, decorative or various hardware, hinge heads, magnetic heads, brake pistons,
hydraulic pistons, electrical fittings, valves and valve parts.
7000 Series
Represents 7075 mainly contains zinc. Also belongs to aviation series, is aluminum magnesium zinc
copper alloy, heat treatment alloy, belongs to super hard aluminum alloy, has good wear resistance.
7075 aluminum plate is stress-removed, will not be deformed and warped after processing. All the
ultra-large and ultra-thick 7075 aluminum plates are detected by ultrasonic wave to ensure that there
is no sand hole and impurities. The high thermal conductivity of 7075 aluminum plates can shorten the
molding time and improve the working efficiency. 7075 is a high hardness, high strength aluminum alloy,
often used in the manufacture of aircraft structure and futures. It requires high strength, corrosion resistance
of high stress structural parts, mold manufacturing. Rely on import basically, our production craft still need
to be improved. (The company once had a foreign company proposed that the domestic 7075 aluminum plate
annealing is not uniform, the surface and internal hardness of aluminum plate is inconsistent problem)
8000 series
The more commonly used 8011 belongs to other series. In my memory, aluminum plate is mainly used to
make bottle caps. It is also used in radiator, most of which are aluminum foil. Not very often.
9000 Series
Belongs to the standby series, the technology is so developed, in order to cope with the appearance of
aluminum plate containing other alloying elements, the International aluminum Plate Federation specially
indicated that the 9000 series is the standby series, waiting for a new variety to appear to fill the gap of the 9000 series.
| Product Name | Aluminum Sheet |
| Material | 1000 series,2000 series,3000 series,4000 series, 5000 series,6000 series,7000 series |
| Standard | ASTM / GB / EN / BV / etc. |
| Application | Building/ Decoration/ Construction/ Furniture/ Ceiling and Wall/ Elevator/ Household Appliances |
| Service | OEM/ Customized sizes/ Customized fabrication |
| Packing | Export standard package:bundled wooden box or as required |
| Origin | China |
| Payment Terms | 50% T/T deposit, the other 50% before shipment. |
| Delivery Time | Ready stock: 7-10days/ Future Goods: 25-35 days |
Factory Show:
* We will reply within 12 hours
* Samples can be supplied for free
* Each roll is 100% under quality control and inspection before shipment
* Book the ship as customer required , and choose the cheaper one for customers.
* Pick you up/ see you off in the airport when visiting our factory
* Book hotel for customers during visiting
Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité 
