Système de séchage UV SPOT (LED-800S)

LED Light Source
Different from the legacy UV curing system, this device uses the LED (Light Emitting Diode), instead of the bulb as the light source.
Long Service Life
The LED is highly stable and durable. The expected service life is 125, 000 hours, 40 times longer than that of the bulb, which is 2, 000~3, 000 hours only. It greatly reduces the bulb replacement and related cost.
High and Adjustable UV Output power
The output UV Power of the standard model is specified at 2 W. The UV output can be adjusted from 0 W to at least 2W, typically 3W. The enhanced model can provide up to 6 W UV output, satisfying various curing requirements.
High Output Stability and High Curing Efficiency
The independent cooling design enables the LED to generate strong UV output with high stability over a long period of time. This is a sharp contrast to bulb-type light source with degrading output over a short service period.
With the output from a flex tube, the user can freely adjust and fix the irradiation direction with five degree freedom. In comparison with the traditional hand hold design, this design significantly improves the curing efficiency and flexibility.
Reduction of Heat Damage
Different from the bulb-type light source, LED source will not thermally damage the illuminated objects rapidly due to rapid heating up. It is best suited for curing of the high-end products.
Optimized Cooling Design and long operation time
The independent cooling design enables the fully optimized operation of LED in a compact structure.
Multiple UV curing headers available
Five different irradiation headers are available to conveniently provide different spot sizes to fit the size of the workpiece.
LCD penal display, Easy to Operate
LCD penal provides clear and straightforward interface for operation convenience.
Compact Size
The external dimensions are 20 cm * 18 cm * 12 cm.
Energy Efficient
With only 60W power consumption, the running cost is low. It can adopt an input of 100 VAC ~ 240 VAC.
2.3 Product Application Fields
The FIHIX UV spot curing system can be applied to the fiber communication, electronics, precise components, magnetic head, optical lens, LCD panel, micro motor, medical appliance, art craft, hard disk, and other emerging fields. It can be used with the automatic or manual epoxy dispense machines. The system can replace the legacy spot light source based on high pressure mercury lamp.