Personnalisé: | Personnalisé |
---|---|
Certification: | ISO, Iaf, GB/T, ISO/Ts, Bc |
Pièces normalisées: | Oui |
Universel: | Oui |
Type: | Roulement à billes |
Matériel: | Acier chromé |
Fournisseurs avec des licences commerciales vérifiées
A Grade 100cr6,AISI52100,SAE52100,Gcr15, Suj/2,Suj-2 roulement à billes en acier chromé
Élément | Nom | Matériau |
1 | Bille en acier au carbone (faible) | AISI1010,AISI1015,Q195,Q235 |
2 | Bille en acier au carbone (haute) | C80, C82, C85 |
3 | Bille en acier inoxydable (austénitique) | AISI304/304L/316/316L/201/665 |
4 | Bille en acier inoxydable (Martensitique) | AISI420/420C/440/440C |
5 | Bille en acier chromé (ferritique) | AISIE52100/100Cr6/Gcr15/SUJ-2 |
Nous sommes une société spécialisée dans le traitement de balle, avec les droits d'exportation indépendants, force technique forte et la capacité de développement et de production de produits. Nous possédons des produits G2000, G1000, G500, G200, G200, G100, G60, G28, G20, G16, G10, G5, G3. Les spécifications sont de 0,45 mm à 50 mm pour de nombreux types d' acier à roulement, acier inoxydable, acier au carbone, etc
Qualité bille acierNORME GB/T 308.1-2013 ET ISO3290-1:2008 | ||||||||
GRADE | VDWS(max) | △SPH(max) | VDWL(max) | RA(max) | Valeur de la jauge d'espacement | Valeur de la jauge de priorité | Espacement des diviseurs valeur de la jauge | Valeur de jauge des diviseurs |
μm | ||||||||
G3 | 0.08 | 0.08 | 0.13 | 0.01 | 0.5 | -5,...,0.5,0,+0.5,...,+5 | 0.1 | -0.2,-0.1,0,+0.1,+0,2 |
G5 | 0.13 | 0.13 | 0.25 | 0.014 | 1 | -5,...,-1,0,+1,...+5 | 0.2 | -0.4,-0.2,0,+0.2,+0,4 |
G10 | 0.25 | 0.25 | 0.5 | 0.02 | 1 | -9,...,-1,0,+1,...,+9 | 0.2 | -0.4,-0.2,0,+0.2,+0,4 |
G16 | 0.4 | 0.4 | 0.8 | 0.025 | 2 | -10,...,-2,0,+2,...,+10 | 0.4 | -0.8,-0.4,0,+0.4,+0,8 |
G20 | 0.5 | 0.5 | 1 | 0.032 | 2 | -10,...,-2,0,+2,...,+10 | 0.4 | -0.8,-0.4,0,+0.4,+0,8 |
G24 | 0.6 | 0.6 | 1.2 | 0.04 | 2 | -12,...,-2,0,+2,...,+12 | 0.4 | -0.8,-0.4,0,+0.4,+0,8 |
G28 | 0.7 | 0.7 | 1.4 | 0.05 | 2 | -12,...,-2,0,+2,...,+12 | 0.4 | -0.8,-0.4,0,+0.4,+0,8 |
G40 | 1 | 1 | 2 | 0.06 | 4 | -16,...,-4,0,+4,...,+16 | 0.8 | -1.6,-0.8,0,+0.8,+1,6 |
G60 | 1.5 | 1.5 | 3 | 0.08 | 6 | -18,...,-6,0,+6,...,+18 | 1.2 | -2.4,-1.2,0,+1.2,+2,4 |
G100 | 2.5 | 2.5 | 5 | 0.1 | 10 | -40,...,-10,0,+10,...,+40 | 2 | -4,-2,0,+2,+4 |
G200 | 5 | 5 | 10 | 0.15 | 15 | -60,...,-15,0,+15,...,+60 | 3 | -6,-3,0,+3,+6 |
Matériau | Composition des matériaux | ||||||||
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Ni(%) | CR (%) | Mo(%) | Cu(%) | |
100Cr6 et SUJ2 ET AISIE52100 Et GCr15 |
0.98-1.05 | 0.15-0.35 | 0.25-0.45 | 0,02max | 0,006max | 0.1 | 1.40-1.65 | 0,05 max | 0.13 |
TI (%) | AI (%) | O(%) | N(%) | PB(%) | SB(%) | AS(%) | SN(%) | CA(%) | |
0,002 max | 0,04 max | 0,0008max | 0,004max | 0,002 max | 0,005 max | 0,04 max | 0,03max | 0,0008max | |
AISI440C | 0.95-1.10 | 0,80 max | 0,80 max | 0,035max | 0,030max | 0,30 max | 16.00-18.00 | 0.40-0.70 | 0.25 |
AISI420C | 0.15-0.36 | 1,00 max | 1,00 max | 0,040max | 0,030max | 1,00 max | 12-14 | - | 0,30 max |
AISI304 | 0,08 max | 1,00 max | 2 000 max | 0,045 max | 0,030max | 8-10 | 18-20 | - | - |
AISI316 | 0,08 max | 1,00 max | 2 000 max | 0,045 max | 0,030max | 10-14 | 16-18 | 2-3 | - |
Fournisseurs avec des licences commerciales vérifiées