200W système de génération de solaire domestique (VSS-01)

Equipment disposition:
1. Solar cell module: 200Wp
2. Exempt-maintain accumulator: 100AH/24V
3. Control inverter: 24V, 300W
Control inverter union (revision since wave)
*solar panel can be extend to 300W
(Electricity generated by this system may be differ a little for the sunlight irradiance and daily average illumination time are different in install section.
We take the daily 5 hour average effective sunshine time as our basis to disposition. This time is a pretty good sunshine time, which can be reached in Northwest area of China and some African country. )

Specification:
With strict test, our solar generating system meets standards as follows:
Solar panel:
* We adopt mono-crystalline silicon or poly-silicon; Transformation efficiency up to more than 15%; Follow BOBS. BOS IEC 61212: 2005 related national standard, such as PV-GAP, IEC 62257-7-1

Generating performance:
Our solar cell board tested in standard luminous intensity or under the mock standard luminous intensity condition, ie, testing environment for the solar radiation is 1000w/m2 and the air quality is 1.5
Mechanical performance:
*Solar battery adopts 3.5mm ultra-thin transparency steeled glass with disposable lamination seal, and fixed with 5mm aluminum alloy material all around the frame.
*Solar cell board with anti-wind and rain function, and the protection rank is IP56.

Environmental performance:
*Can work under 0 to 45 centigrade as what settled operating parameter
*Can operate under environmental temperature -10 to 70 well, and will not harm to cell panel to worse the performance.

Battery:
* The accumulator cell we use is the deep circulation to exempt the maintenance lead-acid battery, which follow national standard like BOS IEC 61056-1
* Under the 20 centigrade, low self-electric discharge and 90% charges is allowed within a month.
* We guaranteed that electric quantity released still achieved or surpasses the initial discharge capacity 80% after 300 completely circulation.
* Packing is the non-corrosiveness and protection range should be IP64

Controller and Inverter Union:
* Inverter adopts pure wave or revision sine wave according to load require.
* controller and inverter union has over-low protection function
* Security protection includes counter extremely, short-circuits, over-flow and adverse current protection.
* With temperature compensation function
* With against thunder protection device
* With LCD screen to display system's running state
* Implements of the long-distance monitor can be allowed in correspondence according to the requirement.