HBM-3000C door-type electronic Brinell hardness tester adopts advanced design concepts, and all aspects of electromechanics adopt advanced technology in the field of current hardness testers. The detection results are accurate, the display value is strong, the degree of automation is high, the operator's labor intensity is low, and the human error It is small and beautiful in appearance. It is one of the most advanced Brinell hardness testers in China and can completely replace imported similar products.
This hardness tester can be used to measure cast iron, non-ferrous metals, various annealing, quenching and tempering treatments, and most of the steel materials supplied by the factory. At the same time, it is suitable for testing softer metals such as pure aluminum, copper, lead, tin, zinc, etc. and their alloys. Brinell hardness has high measurement accuracy, good reproducibility and representativeness. It is an indispensable hardness measuring instrument in mechanical metallurgy and metrology departments.
The machine body and worktable adopt precision casting technology, which is firm, rigid, precise, reliable and durable;
Door rack, large movable workbench, maximum moving distance 1000mm;
The testing mechanism uses high-precision spoke-type pressure sensors, and the loading device has a built-in pressure sensor with an error of 5‰. The test force value is accurate, stable and reliable, and it has the function of automatic test force compensation.
The self-developed door-type electronic Brinell hardness tester special numerical control system is adopted, which has a fast running speed and a fully closed loop method to apply the test force from fast to slow gradient to ensure that the test force is applied smoothly and without impact;
Using contemporary advanced high-speed microprocessor, instant response is fast, ensuring that the accuracy of the test force is stable within ±0.5%;
Stepping motor, high-precision ball screw and linear guide; precise positioning, easy maintenance;
The test force, load saturation time, feed rate, and test speed can be adjusted and controlled manually;
The test process is automated, and no one makes operational errors;
Accuracy complies with GB/T231.2, ISO 6506-2 and American ASTM E10.
This hardness tester can be used to measure cast iron, non-ferrous metals, various annealing, quenching and tempering treatments, and most of the steel materials supplied by the factory.
At the same time, it is suitable for testing softer metals such as pure aluminum, copper, lead, tin, zinc, etc. and their alloys.
Brinell hardness has high measurement accuracy, good reproducibility and representativeness. It is an indispensable hardness measuring instrument in mechanical metallurgy and metrology departments.
Measuring range: 32-650HBW Test force level: 750, 1000, 3000kgf (optional 187.5, 250, 500,)
Maximum allowable height of test piece: 950mm (customizable)
The lateral movement distance of the hardness tester is 650mm (customizable)
Worktable size (length * width): 1500X1000mm (customizable)
Maximum moving distance of the worktable: 1000mm (customizable)
Center distance between two columns 1350mm (customizable)
Maximum load capacity of the workpiece table: 3000kg
Power supply: 220V, 50Hz
Dimensions: 2000x1500 x 2000 mm (subject to actual conditions)
Weight: 3t (subject to actual conditions)
Door type electronic Brinell hardness tester host 1 setControl cabinet 1
20 times reading microscope (JC-10) 1
Carbide indenter (Φ5 and Φ10): 1 each
Hard alloy steel ball (Φ5 and Φ10): 1 each
Standard Brinell hardness block (HBW100±25 and HBW200±25): 1 block in total
The above is the standard configuration, the actual product is subject to the actual product!
Fournisseur Audité 
