Factory Price 150W 7color DMX512 16CH Stage Light Moving Head Light for Nightclub DJ Disco Party

• Source De Lumière: led blanche 150 w 1pcs
• Matériel: Aluminium
• Émission de la couleur: 7 couleurs plus blanc
• Canal de Commande: 16CH
• Strobe: Lumière Stroboscope de Vitesse Ajustable
• Mode de contrôle: auto, maître/esclave, son actif, menu ou dmx512
• N° de Modèle.: MF-DM150WSLC
• Certificat: CE, RoHS
• Tension: 100/240 v ca, 50/60 hz
• consommation électrique: 170 w.
• angle du faisceau: 13.5 degrés
• mouvement panoramique: 540°
• mouvement d′inclinaison: 270°
• résolution panoramique/inclinaison: 8 bits
• mise au point: mise au point linéaire de près à loin
• Paquet de Transport: Refer to Datasheet
• Spécifications: Refer to datasheet
• Marque Déposée: MF
• Origine: Chine
• Code SH: 9405429000
• Capacité de Production: 10, 000PCS/Months

Description de Produit

Product Description

Features

*Light source:1pcs 150W white LED + 24pcs RGB3in1 LED

*Power consumption:170W

*Beam Angle:13.5 degree

*Electronic dimmer 0~100%

*Pan movement:540°

*Tilt movement:270°

*Pan/Tilt resolution:8-16bit

*Prism rotating 5-facet prism

*Focus:linear focus from close to far

*1 fixed gobo wheel: 8gobos plus blank

*1 rotated gobo wheel: 6gobos plus blank,gobo rotating 360°

*1 color wheel:7colors plus white

*Strobe:0-16Hz, from slow to fast, adjusting

*Control mode:Auto, sound active , DMX512

*DMX channel:16CH

* LCD display

*Pan/Tilt invert option

*Reset to factory settings option.

*Fan Cooling /Forced convection

DMX Channel

Installation Instructions

Set up

Disconnect the power cord before replacing a fuse and always replace with the same type fuse.

3.1 Fuse replacement

With a flat head screwdriver wedge the fuse hold out of its housing. Remove the damaged fuse from its holder and replace with exact

same type fuse. Insert the fuse holder back in its place and reconnect power.

3.2 Fixture linking

You will need a serial data link to run light show of one or more fixtures using a DMX-512 controller or to run synchronized on two or

more fixtures set to a master/slave operating mode. The combinednumber of channels required by all the fixtures on a serial data link

determines the number of fixtures the data link can support.

3.3

3-Pin to 5-Pin conversion chart

Note! If you use a controller with a 5 pin DMX output connector. You will need to use a 5pin to 3 pin as apter CHA-UVET Model No: DMX5M. Or DMX 5F The chart below details a proper cable conversion:

3.4 Setting up a DMX serial data link

At first link the first light and DMX control through XLR-connection signal cable, then connect the light in series, as the follow:

1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3pin connector of the first fixture.

2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the

next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the output as stated above to the input of the

following fixture and so on.

3.5 orientations

This fixture may be mounted in any position provided there is adequate room for ventilation.
 

Description of operation panel

Package & Delivery

Delivery
Mingfeng Lighting is committed to providing timely and reliable delivery services. We offer a range of shipping options, including air, sea, or land transportation, to ensure that products are delivered safely and efficiently. Delivery times vary depending on the destination and shipping method, and we work closely with customers to provide accurate delivery estimates and tracking information.

Company Profile

Ming Feng Lighting Co., Ltd. is a leading manufacturer and supplier of high-quality lighting products. With over 10 years of experience in the industry, we have built a reputation for excellence and innovation. Our products include a wide range of LED lights, chandeliers, pendant lights, wall lights, and more, all of which are designed to meet the highest standards of quality and performance. We use only the best materials and the latest technology to create beautiful, energy-efficient lighting solutions for homes, businesses, and public spaces. Our commitment to customer satisfaction and competitive pricing has made us a trusted partner for clients around the world.

FAQ

Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.

Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.

Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.

Q5: How long time to ship the goods if place an order?
A5:  Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.