Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité
ATC-109N data repeater is a kind of data relay communication product of photoelectric isolated RS-422/RS-485. It can be used with ATC-109N Photoelectric Isolation Interface Converter in combination. ATC-109N data repeater can prolong the communication distance of RS-422 /RS-485 bus network and increase the number of RS-422/RS-485 bus network devices. The inner circuit of ATC-109N Photoelectric Isolation Data Repeater can detect data direction and switch to control it automatically, conveniently to form a RS-485 network without any shake hand signal. This kind of RS-485 control is fully transparent and need not amend software for the former network basing on RS-422/485 working modes. The built in photoelectric isolator and DC/DC converter can offer 3500V isolation voltage and the rapid Transient Voltage Suppressor (TVS) can effectively inhibit lightning and ESD, provide 1000W lightning strike and surge protection power on each line, and prevent lightning strike and common code interference.
1) RS485 Repeater
2) Can prolong the communication distance of RS-422/RS-485 bus network
3) Increase the number of RS-422/RS-485 bus network device
4) Automatic data direction control, zero-latency design
5) Photoelectric isolator and DC/DC module, can offer 3500V isolation voltage and effectively prevent lightning strike and common code interference
6) High efficiency lightning protection tube can effectively inhibit lightning and ESD, and offer 1000W lightning strike & surge protection power on each line.
7) Can greatly enhance the credibility of the whole RS-422/485 network
8) Full metal housing, anti-static, powerful anti-jamming capacity
Application fields:
a) Point to point, point to multi-point communication
b) Industrial distribution system, industrial control automation
c) Road traffic control automation
d) Closed circuit monitoring
e) Security protection system
f) Intelligent card, check on work attendance gate safety system
2.1. Interface feature: Interface is compatible with EIA/TIA RS-485/RS-422 standard
2.2. Electric interface: RS-422/RS-485 interfaces are 6-bit screw terminal
2.3. Transmission media: twisted-pair cable or shielded cable
2.4. Working mode: asynchronous half or full duplex
2.5. Signal indication: 3 signal indication lights indicate TXD, RXD and PWR
2.6. Isolation: isolation voltage 3500VRMS 500VDC sequence
2.7. Transmission speed: 115.2K BPS to 1.2Km
38.4K BPS to 2.4Km
9600 BPS to 5Km
2.8.Number of node:128nodes with TI 75LBC184 Chip
2.9. Protecting grade: RS-422, RS-485 interface 1000W lightning strike and surge protection on each line
2.10. Extended distance: 0-5 kilometers
2.11. Size: 125mmx54mmx25mm
2.12. Working environment: -25°C to 70°C, 5% to 95% relative humidity
Circuit function block diagram
Fournisseurs avec des licences commerciales vérifiées
Fournisseur Audité 
